Premium High Quality Sapele Raised Panel Raised Panel Shutters
Elegant Panels, Durable Frames
Our Atlantic Collection of Raised Panel Shutters is based upon a sculpted raised panel surrouned by a sturdy mortise and tenon frame with beautifully proportined rails and stiles. These wooden shutters make stunning accents to Colonial and Georgian styles of homes, as well as many other traditional strains of architecture. Our Atlantic collection of wood shutters comes in a wide variety of styles, and we can further accommodate discrening home owners and architects with completely custom designs that can include custom sticking profiles, panel profiles, cut outs, radius tops and more.
Solid, Premium Materials
Every rasied panel shutter that we build for our customers is made to order from the finest grades of solid lumber that are available. We are especially careful with the boards that will become panels as the raised panels themselves are actually composed of multiple boards which are glued together with a precision machined spline joint, and then glued and sealed with a specially forumulated exterior wood glue. Each board is hand selected for the job by our state of the art software and expert craftsman. Estate Millwork does one hundred percent of the sawing, dimensioning and maching of our lumber so that we can keep the tightest control of quality.
Timeless Craftsmanship
The precisely crafted component parts receive further attention prior to assembly. The raised panels are 15/16" thick and are raised with a sweeping ogee profile that give strong highlight lines as well as gradual shadings that emphasisize the true three dimensional nature of these raised panel shutters. The raised panels are set in deeply machined relief slots in the shutter frame which allow the panel to float, protecting both the frame and panel from damage when the panel slightly expands and contracts with changes in temperature. After all of the parts have been crafted, they are assembled into a raised panel shutter, glued and pegged and machine sanded. After the machine sanding process, the shutters are then hand sanded, and carefully finihsed to the customers specifications which may require a natural finish, a primed/painted combination or staining.
Solid Wood Mortise and Tenons
True Tenons
Our premium quality shutters are carefully constructed using a time consuming and precise operation. Whereas other lower quality shutters are made using screws, nails, dowels or biscuit joints, each of our exterior wooden shutters has a minimum of 4 hardwood tenons. The end of each rail is painstakingly machined to have a 1/2" X 1 7/8" tenon by a custom built tenoning machine that Estate Millwork developed so that we could continue to provide the best quality joinery in the industry, at an attractive price. We gave up the cost, but not the quality.
Deep Pocket Mortises
Each stile is precision machined with a minimum of two deep pocket mortises, and these mortises perfectly fit the associated tenon. Again, Estate Millwork has used precision automation to preserve the quality of our products, while reducing the cost. We have software that connects our website directly to the machines in the plant, and when a customer places an order with us, all of the precision programs for machining the mortises into the stiles are sent to the plant for automatic execution. The mortise tenon joint, is the strongest joint in millwork, and adds tremendous strength, even without the use of glue.
Hardwood Dowels
Once the tenon and mortise have been machined, the parts are put together and a hole is drilled through the mortise and the tenon. A slightly oversized hardwood dowel is driven into the hole, locking the tenon into the mortise for the life of the shutter. Even though glue is not required, Estate Millwork takes the added step of gluing the tenon into the mortise, and gluing the hardwood dowel into the stile.
Hand Assembly
In our commitment to preserving the best of quality millwork traditions in each wood shutter, we have automated much of the drudgery of some of the operations, but assembling a shutter is still something very much in the realm of craftsmanship. After all the parts of each wooden shutter are manufactured, one of our skilled craftsmen fits them together in a specialized jig for dry fitting and final assembly. We do not use pneumatic or hydraulic clamps as they can damage or over-stress the wood. The craftsman uses his innate feel for the materials to set the appropriate clamping pressure prior to drilling and doweling. Each wooden shutter receives the individual attention of craftsmen all along the way, but the final assembly is where the shutter comes together the first time, ready for years of service on your home.
Shutter Options
Thickness, Width, Height
The "slab dimensions" are the size of the actual exterior shutter from top to bottom, left to right, and the thickness. Our default standard thickness is 1 5/16", but that can be varied from 7/8" to 2 1/4" to match existing exterior shutters. The length and height can be specified to the nearest 1/16" inch. Depending upon the style of the shutter, we have made widths up to 20 feet wide, and heights up 30 feet.
Shutter Frame Dimensions
Because all of our exterior wooden shutters are custom built from true rail and stile construction, we have the ability to replicate any component dimension on existing shutters, including rail height, placement, width, thickness, and stile width and thickness. Typically, the bottom rail of our custom shutters is 4. high, and all other rails are 2 1/2" inches. Stile widths are usually 2 1/2" but we have the ability to make them of virtually any width, including different widths for left and right stiles -- sometimes used for pairs of shutters.
Custom Sticking
Out standard products are S4S, or square shoulder sticking, but we have the capability to mould any feasible profile to the inner or outer frame fields. Common choices are ogee, cove and bead, bevel, cove etc. In addition to our stock sticking profiles, we can also custom grind tooling to achieve any desired profile to either match historical wood shutters, or to meet an architects or home owner.s specifications and preferences.
Shiplapping and Beading
For operable shutters, or for decoration, our wood shutters can be machined with a bead on one face of the inside edge of the shutter, and with a ship lap on the other, allowing the shutters to overlap by 3/8" when they are in the closed position - permitting a tighter fit. The left and right shutters are machined as pairs so that in the closed position, each face of the pair has a decorative bead visible.
Panel Profiles
Our raised panel shutters can be raised with our standard scoop profile, but we offer bevels, coves, ogeees and other profiles as well. Additionally, for the extremely discriminating home owner or architect we can create new tooling to match existing historical panel profiles, or to meet with a unique custom requirement.
Louver Styles
Our louvered shutters can be fitted with either our standard bullnose louvers in 3 sizes, or with a chevron or bevel profile as options. And because we are a custom shutter maker, we can also accommodate any special profiles that are specified by the customer.
Cut Outs
Raised Panel and Flat Panel Shutters can have a limitless variety of decorative cut outs machined into the center of the panels. Common shapes are moons, anchors, trees, hearts and we have a large number of stock cut outs which we offer, as well as the ability to match custom patterns that are provided by the customer
Finishes
Estate Millwork can ship our custom wooden shutters in natural, primed, painted or stained finishes. We can match national brand color numbers, pre-tint primers for light or dark finishes, and apply hand rubbed stain finished, even to the time consuming louvered shutters.
Exquisite and Durable Sapele Hardwood: A Hidden Treasure
Sapele lumber, sourced from the sapele tree native to the tropical regions of West Africa, stands as a prized gem in the realm of fine woodworking. Renowned for its stunning appearance, remarkable durability, and versatile nature, sapele wood is cherished by woodworkers and builders alike for its myriad of applications.
Often hailed as the "African mahogany," sapele hardwood boasts a captivating palette ranging from rich reddish-brown to deep mahogany, acquiring a luxurious patina with age that enhances its innate elegance. Its distinctive ribbon-like grain patterns and lustrous finish add an air of sophistication to any project, captivating designers and craftsmen seeking to create visually striking pieces.
Beyond its aesthetic allure, sapele hardwood offers exceptional durability, withstanding wear, decay, and rot with ease. Whether utilized for interior or exterior projects, sapele's stability and strength ensure longevity and functionality for generations to come.
Highly workable and responsive to finishing techniques, sapele hardwood lends itself to a myriad of design possibilities. Whether applying a clear finish to accentuate its rich grain or opting for a darker stain to infuse depth and character, sapele adapts effortlessly to achieve desired aesthetics. From fine furniture and cabinetry to boat building and musical instruments, sapele hardwood proves its versatility time and again, cementing its status as a valuable asset in the world of woodworking and interior design.
Handcrafted with Sustainably Harvested Lumber
At Estate Millwork, we employ a meticulous process to ensure the quality and sustainability of our lumber. Our commitment begins with the careful air drying of much of our lumber, followed by further refinement in low wattage dehumidification kilns to achieve optimal moisture levels.
Every single piece of wood we acquire undergoes thorough utilization in our production processes. Leveraging advanced automated saws and optimization software, we achieve an exceptional yield ratio of 94 percent. This means that nearly all of the wood we purchase is transformed into usable products. The small remainder, comprising mainly sawdust and chips, is utilized efficiently: either utilized as fuel to power our operations, or repurposed by providing bedding and contributing to composting for local cattle farmers.
Our dedication to minimizing waste extends to the sourcing of our materials. A significant portion of the lumber we use hails from Amish farmers within our county. These farmers adhere to traditional practices, utilizing horses for harvesting and operating vintage 1920s sawmills. Such methods not only contribute to the preservation of heritage techniques but also entail lower environmental impact compared to modern industrial approaches.
Furthermore, our commitment to sustainability is evident in the sourcing of our imported lumber. We exclusively procure lumber from plantation-grown sources, thereby ensuring that our operations do not contribute to deforestation or the depletion of natural forests. By prioritizing responsible sourcing and efficient utilization, Estate Millwork strives to uphold environmental stewardship while delivering exceptional craftsmanship.
To learn more about our sustainability practices click here
